Skip to main content

WHICH TYPES OF POLISHES CAN BE APPLY ON ITALIAN MARBLE

Types of Italian Marble Finishes


  • There are different types of finishes available in Italian Marble. These finishes are done on top of plain marble surface. When you buy Italian Marble it is absolutely plain. We can get it High Glossed Polished. There are two types of polishes which are namely, Mirror Finish Polish & Diamond Polish. which are smooth polish. You can see your own image in the marble surface. That’s why it is called Mirror finish or Mirror Polish.

  • Apart from these common Polishes, there is Honed Finish. Honed finish on Italian Marble is slightly rough. Sand blasting is another process which makes Marble more rougher.
  • Italian Marble is highly preferred with Mirror Polish. This also gives very smooth surface. if your floor is rough & if people walk with shoes, dust might get accumulated. Hence on floor always Plain finish or Mirror Finish is recommended. 99% of the times Italian marble floor is always Mirror finish.
  • Honed finish Italian marble is used on walls not on the floor. Or if there is some slippery area, they will use rough finished Italian marble.

Comments

  1. The Countertop ShopNovember 18, 2020 at 12:43 AM

    Great Post, This is giving more valuable information and contains a lot of information. This post is very useful for me as well as for others so please share more posts like this. Thanks for sharing. marble countertops

    ReplyDelete
  2. Rozer BaineNovember 23, 2020 at 9:49 PM

    Nice Post For me and It is a very different blog than the usual ones I visit. From this post, I get more knowledge and I read a lot of interesting content here. Thanks for sharing a knowledgeable post. marble countertops lima ohio

    ReplyDelete

Post a Comment

Popular Posts

TYPES OF CRACKS IN R.C.C COLUMNS

Image
Columns are load transferring member of structure. It transfers load from slab and beam to foundation. When an excess loads are activated on column or due to poor quality of concrete or workmanship, it results in a several cracks in column. Types of cracks develop in column are given below : 1. Diagonal crack 2. Horizontal crack 3. Corrosion crack 4. Splitting crack 1. Diagonal crack :  This type of crack developed in the column due to insufficient reinforcement and inadequate cross section of column. The main cause for developing diagonal cracks poor load carrying capacity of column. Diagonal crack can affect the soundness of structure hence it needs to be handle properly. 2. Horizontal crack : Horizontal crack in reinforced concrete column is generally found at the beam-column joint, and on column face where tensile stress is massive. Columns with insufficient moment resistance strength, inadequate reinforcements, or disposition of installed reinforcement may l
Read more

CLASSIFICATION OF STAIR AND THEIR USES

Image
STAIR TYPES AND THEIR USES Types of stairs is widely based on the shape of the stairs. Straight stairs, Turning stairs and Continuous stairs are broad types of stairs. A stair is a set of steps leading from one floor of a building to another, typically inside the building. The room or enclosure of the building, in which the stair is located is known as staircase. The opening or space occupied by the stair is known as a stairway. Types of Stairs – Classification of stairs: Stairs can be broadly classified into three types: 1. Straight stairs 2. Turning stairs 3. Continuous stairs 1. Straight stairs: Generally for small houses, available width is very retractable. So, this type of straight stairs are used in such conditions which runs straight between two floors. This stair may consists of either one single flight or more than one flight with a landing. 2. Turning stairs: Turning stairs are sub classified as: a) Quarter turn stairs b) Half turn
Read more

CHECKLIST FOR TERRACE WATERPROOFING (BRICK BAT COBA)

The following point should kept in mind during waterproofing work : Remove extra mortar accumulated on terrace and clean the surface clean with   water. Fresh slurry is prepared by mixing cement with 1-2% super seal powder (acrylic based chemical). Leave sufficient margin (approx. 150mm) w/p from terrace door bottom   level. Mark the levels on parapet wall all   round. Provide rain water pipe outlet bend in correct   position. Make available well burnt brick bats, properly soaked in   water. Check for levels & proper slope towards, rain water pipe   outlet. Fix   the   bricks   &   fill   the   joints   of   brick   bats   with   C.M.   1:5   and   maintain   a   slope   of   1:150   with   waterproofing compound. Proper round shape to the mortar near water   pipe. Curing of brickbat coba for 7   days. Spread the cement mortar of 1:4 proportion along with waterproofing compound over brick bat   coba. Apply cement slurry over the surface along with waterproofi
Read more